Your Chainsaw Needs Maintenance, Here Is How

Basic Chainsaw Caring Guide

To make a petrol chainsaw last as long as possible, it must receive regular maintenance. Chainsaw owners are well aware of their tool's remarkable capability to chew through wood. Due to the fact that modern saws are so productive and tend to entice owners into trusting that everything is going well, it is easy for users to take these tools for granted. People who disregard the warnings will then be hit with a heavy repair bill as punishment.

It is also possible for some owners to be intimidated by what appears to be a complex machine and to be wary of interfering with delicate parts of it. Regularly checking your chainsaw would do your chainsaw a lot of good, and anyone with a little knowledge can do it. It makes sense to leave the innards of the machine to the experts, but a properly maintained chainsaw is less likely to require major repairs than one that has been neglected.

To help you maintain your chainsaw and improve its longevity, we have put together this quick guide. No matter what type of chainsaw you own, whether it is a petrol chainsaw or a cordless electric chainsaw, sharpening the chain and keeping it well oiled are mandatory. Doing this will save you from having to purchase expensive new chains and bars.

How To Tighten The Saw Chain

In order to maintain your chainsaw, you must first tension the chain. Tensioning the chain is important for your safety and the proper performance of the saw. A loose chain may jump off the guide rod, causing injury to the user or damage to the machine. It is also not good for the chain to be too tight, because it will cause the guide rod to wear faster than expected. The correct chain tension means that when the chain contacts the guide rod, you can still pull it comfortably by hand. In order to achieve correct tensioning, make sure that the chain is allowed to cool before adjusting it.

How To Do Chainsaw Bar Maintenance

Chainsaws are most likely to breakdown at their guide bar, as it does most of the cutting. The underside is especially prone to wear since it is exposed to most of the elements.

You might discover that the bar is wearing out very quickly if you have incorrect chain tensioning, shoddy lubrication or poor operating practices.

If you want your chainsaw bar gets worked evenly, make sure to:

turn the bar each time when you switch your chain.

Regularly check your bar marks and general wear condition.

don’t hesitate to replace the bar once you find the bar groove isn’t sufficiently profound to hold the drive link or the chain isn’t held straight in the groove.

Never Forget To Get Your Chain Lubricated

In most case the Lack of or inadequate chain lubrication is the contributes most to premature wearing of chains. It is an absolute essential step to keep the chain lubricated to prevent calamitous failures that could possibly make snapped chain or locking of the drive mechanism. And the best way to make this done is by topping up your lubricating oil every time you refuel the chainsaw.

How to check if your chainsaw is properly lubricated?

Start your chainsaw, draw it over a stump, and rev the engine. If it leaves a thin line of oil, then everything is okay.

Sharpening The Chain

It is the most important part of chainsaw maintenance. Even if you avoid cutting into materials that reduce sharpness, such as rock and soil, a chainsaw's sharpness will gradually deteriorate over time. The equipment is strained and the fuel consumption is higher when a blunt chain is used. Sharpening the chain on a regular basis will keep it in top condition for the next task.

When it comes to sharpening chainsaws, each model requires a specific approach. As a result, we recommend that you follow the manufacturer's instructions on how to sharpen the chain. Some manufacturers recommend having the chain on their machines sharpened by a professional, while others suggest using specialized sharpening devices.

What are the signs that your chain needs sharpening?

The answer is all in the saw-waste; wood chips indicate a sharp chain, while dust-like waste indicates a dull chain.

Here are some more tips on chainsaw maintenanceMake sure that the oil tank is full before each use.

Stop and clean the chain if sawdust and wood chips accumulate.

After every few uses, make sure all screws, nuts, and bolts are tight. Vibration can cause these parts to loosen.

Clean the air filter whenever it becomes clogged with dirt and debris. Replace if necessary.

In Summary

Even with years of punishing use, a chainsaw can work well and safely if properly maintained. If you need more information regarding your particular tool, be sure to read your instructions manual as well. Last but not least, you should handle chainsaws carefully because they are one of the most dangerous gardening tools.

On Farmertec.com we review the best gardening products and write gardening guides. Our website is backed by a real Chinese team that has vast experience developing and testing the types of products we review, as well as years of knowledge on the topics we cover from actual experience.